Save a Ton of Money & use this Solar How To Guide. Click Here
The technology for transforming solar energy into electrical energy has evolved rapidly in the last twenty years, and as a result, many of us have decided to give it a go which has created a major need for user friendly Solar How To guides. So without further a’du…
… slash the massive cost of buying expensive solar panels by using this Solar How To Guide to make your own instead.
The right How To advice for Solar DIY is centered around making your own solar panels with the least fuss. The real benefit of constructing homemade solar panels is that homeowners will learn how to repair & maintain them when damage occurs. This is an important advantage given the fact that solar energy naturally lends itself to remote locations. They’re light-weight for transporting, except for batteries used for storage, and installation of panels before operation doesn’t require special equipment or electrical knowledge.
There is no doubt that the easiest way is to just go out & choose a specialist to do the installation. Yet in the spirit of using green technologies making homemade solar panels (and saving a ton of money) by using a reputable Solar How To guide is a growing passion for DIY enthusiasts. But there are some pitfalls to avoid.
Most of the materials are simple to access, but the cell area can confuse beginners. To begin with, photovoltaic cells are the easiest and cheapest to work with. Don’t use those wax dipped or “B” class type, as the end result won’t meet the electrical production levels expected.
In addition, any reliable Solar How To Guide will inform you that certain supplies from countries such as China are often substandard & unreliable in supply. The actual construction process for homemade solar panels is to assemble all the equipment and materials in a dry and dust-free garage or room.
Most people already have the common everyday tools needed to build your own solar panels, (god knows your average do-it-yourselfer does 
. These include:
- hammer,
- a brush,
- soldering iron,
- screwdrivers
- and a saw.
Materials list includes some:
- timber to make the frame for mounting the panels on the roof.
- Screws and wood panelling to glue the cells on to,
- and black paint is also necessary to make your own solar panels.
The next step in this simple Solar How To method is obtaining photo-voltaic cells and the tab wiring to connect them. You’re much better of selecting pre-tabbed cells to make the project less tedious and quicker.
Then all you need to get is:
- eva glue,
- solder & flux,
- clear plastic sheeting to cover the lid of the housing for the cells,
- blocking diodes to stop the current reversal, and the project can be started.
Make an outer housing and seal it with some silicone filler. Lay the cells onto the backing-board and glue them on a 6×6 configuration with the tabs up. Join the tabs in series with solder & tab wiring. Add the diodes to stop current reversal when the unit isn’t getting enough sun.
Put the panel in the housing, cover and seal with the clear plastic sheeting boards, and it’s ready to be placed on the roof frame once you finish painting the housing black to help heat energy absorption.
With the right Solar How To methods, DIY solar panels will look as good as plant munufactured ones do. The end result will only vary slightly. As an afterthought, be conservative with expected levels of power output, because many factors, including hours of sunshine & light strength will determine how productive a system will be.
A good Solar How To Guide will also recommend a simple energy audit to be done before the project starts. This is a great idea since your house can get real benefits from adopting energy saving practices, even before you apply the homemade solar panels.
Time for an Honest Reality Check…
Unlike other Solar How To guides & green energy websites, we actually bring to the attention of our dear readers the fact that solar panels alone are normally not enough to power 100% of your home, (unless you cover all of your roof with panels, which is quite an undertaking).
And because we don’t believe in leaving you hanging in that regard, by opting in bellow we’re going to recommend and provide you special access to cheap & affordable, detailed step-by-step (but easy) DIY blueprints for Magnetic Generators. These simple Magnetic Generators are growing in popularity.
They can be made at home, needs no wind, sun or gas to run 24/7… and will certainly provide more than enough power for ALL your home when used to compliment your DIY solar system. Just tell us where to send your access to a trusted & complete step-by-step plans for Magnetic Generators, as well as complete step-by-step DIY plans for a homemade solar power system too… by opting in bellow.
Yours Free, by opting in bellow
Furthermore… you’ll not only get access to complete details & information on easy DIY Solar & Magnetic Power… (to experience that dream of freedom & independence) , we’ll also send you our popular guide “Solar Energy Unleashed‘ eBook at no charge. This book has been very popular with our readers and has proven to be a invaluable resource.
And because green energy technologies continue to evolve, bringing newer & innovative free energy devices & plans to market… you’ll also receive the Free-Energy Updates Newsletter to keep you in the loop so you don’t miss out on these continuing new developments.
All this just for a simple email. Opt-in bellow now…
UPDATE: Recent publications of DIY Plans for a simple free energy device based on suppressed inventions by Nikola Tesla are now available to the public.
This GUARANTEES you’ll power 100% of your home completely on free electricity. You’ll ALSO receive access to all these too just for the cost of a simple email.
